Photo Electric (Optical) Smoke Detector APPRON MC-206
Detector has a monitoring LED that operates about every 16 seconds ( flash ) during standby status. When there is smoke, the detector will issue fire signal after 16 consecutive confirmations. (every 0.3 second) If any dust causes flashing or an intermittent signal, it will return to normal status after 32 confirmations. The coating of terminal contacts meets the Rohs and provides better results on corrosion and conductive. Each detector has added specific components that will effectively isolate interference from electromagnetic fields and lightening strike. All detectors use high-density steel for the contacting plate material.
||: 12V-30V (DC24V)
||: Max 30mA
||: Comply to EN 54
||: 111 mm (Dia) x 50 mm (H)
||: About 170g
|Building Height Under 4m
||: 150 m²
|Building Height 4m~20m
||: 75 m²
Prohibit from being installed at the places with large volume of smoke and steam lingering, and the inlet and outlet of cold and warm air.
AH-031 APPRON Fire Alarm Detector Mounting Base, Compatible For MC-206
As there is smoke getting in the detector, by making use of the scattered rays caused by the reflection of smoke, the rays can be detected by the luminous two-node substance inside the device. Then the detector functions and sends out alarm. Meanwhile, the LED is turned on. It is suitable for installation at the places like the entrance of staircase, corridor, lift hall, indoor room, etc.